• [2019-03-07]

    Metal China 2019

    Wuxi Jiebo Electrical Technology Co.,Ltd. will be invited to participate in the 17th China International Foundry Expo ( Metal China ) from March 13 to March 16.

  • [2019-01-24]

    IFEX 2019 15th International Exhibition On Foundry Technology, Equipment, Supplies And Services

    Wuxi Jiebo Electrical Technology Co.,Ltd. is invited to IFEX 2019 15th International Exhibition On Foundry Technology, Equipment, Supplies And Services from January 18 to January 20.

  • [2018-12-06]

    Install T5 Optical Emission Spectrometer in Uzbekistan

    From Nov. 28 to Dec. 4, our engineer went to Uzbekistan for installing and debugging T5 Optical Emission Spectrometer.

  • [2018-11-28]

    Pakistan Customer Come to Jiebo for purchasing CS996 Carbon Sulfur Analyzer

    On Nov 28, Mr Shafqat Masud from Pakistan visit our company and discuss the order CS996 Carbon Sulfur Analyzer.

  • [2018-11-11]

    Install JB-750 Optical Emission Spectrometer in Saudi Arabia

    During October 28 to November 8, our engineer went to Saudi Arabia for installing the JB-750 Optical Emission Spectrometer.

  • [2018-10-19]

    Turkey's casting, nonferrous metals and steel Expo

    Dear Sir / Madam, Wuxi Jiebo Electrical Technology Co.,Ltd. will be invited to participate in ANKIROS 2018 from Oct 25 to 27. Our stand number is: H8-F100 We sincerely invite you to visit our stand during this exhibition. Best regards,

  • [2018-10-19]

    Which analyzer can not be used to analyze?

    The process of spectral analysis is the introduction of the sample into the light source, the energy of the sample, the sample evaporation into gaseous atoms, and the outer layer of the gaseous atoms excited by the low energy state, in which the atoms are very unstable to the ground state or low energy state, then produced radiation.

  • [2018-10-19]

    Method and equipment for rapid inspection of steel components

    Main technical index of carbon and sulfur: Measurement range: carbon: 12.8% ~ 0.02% (need to change the amount of sample): 0.001% ~ 3% Measurement time: carbon sulfur about 45 seconds (excluding the sample, sampling time) Element analysis method: photoelectric colorimetric analysis

  • [2018-10-19]

    Several methods for analysis of carbon and sulfur in iron and steel

    1, (high frequency infrared carbon sulfur analyzer) infrared absorption method: the carbon and sulfur in the sample is heated by high temperature under oxygen enrichment, which is oxidized to carbon dioxide and sulfur dioxide gas. After treatment, the gas enters the corresponding absorption cell, and absorbs the corresponding infrared radiation. The detector is transmitted to the signal, and the output results are processed by the computer.

  • Total: 52 Pages: 5/6 Home Pre Next Last