InnovateT5 Full Spectrum Optical Emission Spectrometer adopts the international standard of design and manufacturing technology. It uses the most advanced CMOS signal acquisition device from Japan Hamamatsu Co. Each CMOS can set the number of sparks separately. It adopts vacuum light chamber design and full digital excitation light source.. This CMOS Spectrometer is not only contain the feature of full spectrum of CCD spectrometer but also have the advantages of PMT spectrometer which has very low detection limit for nonmetallic elements. The design of the whole machine is reasonable. It also has many advantages such as easy operation, high accuracy test result, long-term stability etc.
High Performance Full Spectrum Analysis
* High sensitivity and response speed
* High UV sensitivity and accurate detection of short-wave elements in deep UV such as C, P, S, B, As, N
* Adding matrix, material types and analytical elements without cost of adding hardware facilities
* Vacuum chamber integration
Stable And Reliable Operating Capability
* Interference subtraction technology
* Drift correction technology
* Easily to use
Intelligently Working Program
* Prefabricated work curve with different materials and grades
* Optimal test condition be automatically selected
* Scope of analysis be drawn or extended by user
Advanced Analytical Software
* Fast analysis speed, takes 20s for one test
* According to different analysis materials, setting proper preburning and measuring time to achieve best analyzing effect
| Optical System | Paschen-Runge system;
CMOS full spectrum detector;
Wavelength Range:140～680nm |
| Argon | Gas Purity Requirement: 99.999%;
Gas Inlet Pressure: 0.5MPa;
Excitation flow rate 3.5L/min;
Maintain flow rate 0.4L/min;
Standby flow rate 0.1L/min |
| Spark Table | Flexible sample clamp design;
Hole Diameter :13mm |
| Light Source | Programmable pulse all digital light source;
Discharge Frequency: Max 1000 Hz;
Discharge Current: Max 400A;
Ignition Pulse:1～14kV;
Spark Excitation Pulse:20～230V |
| Weight | 78kg |
| Dimension | L780mm*W585mm*H360mm |
| Working Power | （220±20）V AC，（50±1）Hz |
* Foundry Metallurgical Industry
T5 is a quick assistant for rapid quantitative analysis and metal material quality monitoring in front of metallurgical furnace. Its analytical precision can meet the requirements of laboratory level with stable and reliable data. T5 is applied to incoming materials inspection and quality control for metallurgy, casting, machining and other industries.
* Machining
T5 provides production guidance for metal parts manufacturing and ensure that the quality of critical metal parts meets application requirements. T5 has advantage of high analysis precision, low detection limit and fast analysis speed. It can provide brand identification and element detection, product quality control.
* Laboratory Research
In the development of alloy materials, the ratio of raw materials to distribution is required. T5 can help to improve the quality of alloy materials and provide material basis for advanced equipment manufacturing.
