Noble T7 Optical Emission Spectrometer adopts the international standard of design and manufacturing technology. It uses the most advanced CMOS signal acquisition device from Japan Hamamatsu Co. Each CMOS can set the number of sparks separately. It adopts vacuum light chamber design and full digital excitation light source.. This CMOS Spectrometer is not only contain the feature of full spectrum of CCD spectrometer but also have the advantages of PMT spectrometer which has very low detection limit for nonmetallic elements. The design of the whole machine is reasonable. It also has many advantages such as easy operation, high accuracy test result, long-term stability etc.
* Optical Accessories
High precision magnetically saturated stabilized power supply
Argon gas purifier
Grinding machine for ferrous metals
Small lathe for non-ferrous metals
Covering All Metallic And Non-metallic Elements
Detecting Full Spectrum Data
* Ultimate elemental flexibility
* Comprehensive scope of analysis
* Adding matrix, material types and analytical elements without cost of adding hardware facilities
* Vacuum chamber integration
Accurate Analysis To Ensure Product Quality
* Automatically select the most appropriate work curve for analysis
* Interference subtraction technology
* Drift correction technology
Simple And Effective Standardization
* Intelligent calibration logic
* New standard for R&D and process/quality control
Excellent Ease Of Use For Effortless Operations
* Fast analysis speed, takes 20s for one test
* According to different analysis materials, setting proper preburning and measuring time to achieve best analyzing effect
Optical System | Paschen-Runge-Roland Circular Full-Spectral vacuum optical system;
High performance CMOS array;
Wavelength Range:120～800nm;
Grating Focal Length:401mm |
| Argon | Gas Purity Requirement: 99.999%;
Gas Inlet Pressure: 0.5MPa;
Excitation flow rate 3.5L/min;
Maintain flow rate 0.4L/min;
Standby flow rate 0.1L/min |
| Spark Table | Flexible sample clamp design;
Hole Diameter :13mm |
| Light Source | Programmable pulse all digital light source;
Discharge Frequency:100~ 1000 Hz;
Discharge Current: Max 400A;
Ignition Pulse:1～14kV |
| Weight | 168kg |
| Dimension | L760*W610*H1130mm |
| Working Power | （220±20）V AC，50/60Hz 1200W |
* Foundry Metallurgical Industry
T7 is a quick assistant for rapid quantitative analysis and metal material quality monitoring in front of metallurgical furnace. Its analytical precision can meet the requirements of laboratory level with stable and reliable data. T5 is applied to incoming materials inspection and quality control for metallurgy, casting, machining and other industries.
* Machining
T7 provides production guidance for metal parts manufacturing and ensure that the quality of critical metal parts meets application requirements. T5 has advantage of high analysis precision, low detection limit and fast analysis speed. It can provide brand identification and element detection, product quality control.
* Laboratory research
In the development of alloy materials, the ratio of raw materials to distribution is required. T5 can help to improve the quality of alloy materials and provide material basis for advanced equipment manufacturing.
